THE H. H. FRANZ COMPANY
Designers and builders of filling and conveyor systems since 1936
The Franz Screw Capper is of such an efficient design that as the bottle is released from the valve, and still under control of the starwheel, our capper simply twists on a cap. This takes place inches from the valve, so no hooding is necessary at the outfeed.
The unit is compact and doesn't obstruct the operator's view. It is also placed within the operator's easy reach.
The Franz Snap Capper is a compact unit mounted at the outfeed starwheel. It caps the bottle with a presser foot just as it is released from the valve.
As in the case of the Screw Capper, no hooding is necessary at the outfeed, and the operator's view and reach is unobstructed.
The Cap Hopper holds a large quantity of caps while automatically feeding small amounts of caps as needed to the cap orienting and feeding device. Overloading is eliminated, and a clear hinged door is provided so the operator can easily see when a fresh supply of caps is needed. The open design makes the cap hopper easy to clean.